Dos xcopy overwrite all

While still included in Windows 10, Xcopy has been deprecated in favor of Robocopya more powerful copy tool, which is now built into Windows Server and Desktop operating systems [ x ] XCOPY is particularly useful when copying files from CDROM to a hard drive, as it will automatically remove the read-only attribute.

Dos xcopy overwrite all

Copy the contents [but not scsiboot. It's K bytes so you may have to remove some of the utils on your bootdisk if you don't have enough room for the scsi drivers.

You may also rename the original config. There are 4 things to look for in the BIOS. First, make sure the bios knows that you have a 1. First see if there is a message when you first turn on your system like: That will be the key you need to access the CMOS setup.

Check your motherboard manual also. The most popular way is to hit the Delete key as the computer boots up, but there are many other ways depending on what type of system you have. Other popular keys include F1 or F2 and for Compaqs, F10 when the big cursor is in the upper right of the screen for example.

Or type setup in DOS on older boxes. Here's another list that was posted on usenet that may help. Sometimes, just holding down a key when you first turn on the computer forces an error which tells you how to enter "setup".

Often you can just disconnect the keyboard to get the "To Enter Setup Press" prompt. Write it down, turn the power off, reconnect the keyboard and go. A whole slew of laptops have cmos access software on the hard drive. For example, on old Toshiba's there is a tsetup file in c: Or, your laptop may have bios access software that you have to find and run in windows.

It is often available from their website. If you get real desperate, you can sometimes take out a set of RAM which may cause an adjustment notice where the directions may appear on how to access, or just pulling out the floppy cable or hard drive cable sometimes works.

You may be asked to insert your Win9X CD. This may not work however if your CD drive letter has changed since you installed Windows due to adding another IDE device. You will have to use the above method with Windows Me. Getting your cdrom to work may also be a hassle, unless you make a bootdisk with Windows 98 in that case it will most likely include the drivers that will see your cdrom.

In order to get your cdrom working from a bootdisk, you'll need a line that looks like this in the config. R The device line loads the cdrom driver, cd1.

Your particular CDrom driver if you know where it is will be named something like mtmide. In this case I am naming it tomato, you can name it anything you like but I think it has to be 8 characters or less. R tells your computer to make your cdrom drive letter R.

dos xcopy overwrite all

A proper bootdisk also contains the utilities you will need, like format, fdisk, sys, edit, qbasic, copy, xcopy, label, chkdsk, himem, etc.

Ok, suppose you tried doing it manually, and already did a sys a: You can download shebang1 to an empty folder on your hard drive, click on it, and just copy the extracted files to your bootfloppy.

Make sure tho you have at least mscdex. Do a sys a: You wont have to worry about finding mscdex. X has no utility for making a bootdisk. You have to do it manually.In computing, XCOPY is a command used on IBM PC DOS, MS-DOS, FreeDOS, OS/2, Microsoft Windows, ReactOS, and related operating systems for copying multiple files or entire directory trees from one directory to another and for copying files across a network.

What’s Xcopy? Xcopy is a built in command on Windows OS. Copy is the other command we have on Windows, it can copy files from one directory to another. UNIX For DOS Users. The following table shows a comparison between DOS ( and MS/Windows NT shell commands) and the equivalent Linux/Unix or Bash shell commands.

The xcopy command is a Command Prompt command used to copy one or more files and/or folders from one location to another location. The xcopy command, with its many options and ability to copy entire directories, is similar to, but much more powerful than, the traditional copy command.

Apr 17,  · The following command line includes the syntax and the switches that you can use with the xcopy and the xcopy32 commands in MS-DOS mode. XCOPY. Copy files and/or directory trees to another folder.

XCOPY is similar to the COPY command except that it has additional switches to specify both the source and destination in detail. /R Overwrite read-only files.

/T Create folder structure, but do not copy files.

Using the XCopy Tool - Techmantium